Wheelchair Adjustments A. Knuckles should be in line with the hips. B. Front harness D-Ring clips: clip into extenders behind shoulder blade. Back should be straight. C. Side bar should run parallel to the ground through the center of the body....
Adjusting the Height We offer 4", 6", 9", 12", 15" struts that attach to the wheels for height. The correct height setting is based on both the height and the condition of the dog. If the dog has some use of his/her back legs, then use the snap...
Adjusting the leg rings to fit an intact or un-neutered dog
Adjusting the Front Harness Take the 3 black comfort sleeves off of the harness so you can make sizing adjustments. Dog’s head goes between the black strap and the blue strap. Blue strap goes over the dog's shoulder. Red strap goes behind the...
Clip the Leg Rings to the Wheelchair The Leg Ring straps go over the frame, and the black plastic harness clips have a slot that fits over the Shoulder Socket screws. Put your thumb into the round circle and push upward to lock (you will hear it...
How to Attach a Belly Belt Some animals will need additional support under their belly, but is not needed for every pet. You can determine if the dog needs additional support if their spine bows downward. It is also helpful for overweight dogs or...
Adjusting the Knuckle on a Medium or Large Wheelchair The Medium and Large wheelchair frame are shipped flat. Take out of box with sticker saying "THIS SIDE UP" showing. Set the legs perpendicular to the frame by turning the dial caps counter-...